Kia EV6 (CV) 2022–2025 Workshop Manual

Suspension System / Special Service Tool /

Kia EV6: Special Service Tool

Special Service Tool

Tool Name / Number	Illustration	Description
Ball joint puller 09568 - 2J100		Used for removal of tie rod end
Lower arm ball joint remover 0K545 - A9100		Used for removal of front lower arm ball joint
Shock absorber lock nut remover. 0K546 - F6100		Used for removal or installing of front strut lock nut.
Shock absorber lock nut remover. 09546 - 3X100		Used for removal or installing of rear shock absorber lock nut.

Tightening Torque

Tightening Torque Front Suspension System Item N·m kgf·m lb·ft Front strut upper mounting nut 53.9 - 73.5 5.5 - 7.5 39.8 - 54. ...

PREV

Troubleshooting

Troubleshooting Heavy weight feeling on steering wheel Expected cause Countermeasure Faulty front wheel alignment Adjust or repair Over rotation ...

NEXT

Other information:

Kia EV6 (CV) 2022– Workshop Manual: Charge Door Module (CDM)
Removal 1.Remove the right outside rear combination lamp.(Refer to Body Electrical System - "Rear Combination Lamp") 2.Remove the flange cover (A). 3.Disconnect the charge door control unit connector (A). 4.Remove the stop / tail lamp (A) after removing the screws. 5.R ...

Kia EV6 (CV) 2022– Workshop Manual: Specification
Specification Item Specification Remark Type Water pump BrushLess Direct Current (BLDC) Operating Voltage (V) 9 - 16 - RVWD ON LIN control - Capacity (ℓ)(V) 1.43 kgf/cm ...

KIAEV6.ORG