manager@kiaev6.org (915) 212-77133

Kia EV6: Motor and Reduction Gear System

Previous pageRemoval and Installation - 4WD

Removal Coolant Inlet Temperature Sensor 1.Disconnect the battery negative ( - ) terminal and the service interlock connector.(Refer to Battery Control System - "Auxiliary 12 V Battery" ...

PREV

Next pageSingle-Use Parts

Single-Use Parts Non-reusable parts (Single-Use Parts) Workshop manual provides “Components and Components Location” which can be used to identify “Non-reusable parts”. When repairing a ...

NEXT
Other information:

Kia EV6 (CV) 2022– Workshop Manual: Front Glass
Removal     • To remove the front glass, use the tools shown in the following figure. [Tool Diagram] Square wire Insert-type wire grip • Insert and fix the square wire into the hole of the wire grip . [Tool Assembly Diagram] 1.Fully open the moving glass b ...

Kia EV6 (CV) 2022– Workshop Manual: Rear Brake Caliper
Component 1. Brake Pad 2. Brake Pad Liner 3. Torque Member 3-a. 98.1 - 117.7 N·m (10.0 - 12.0 kgf·m, 72.3 - 86.8 lb·ft) 4. Air Bleeder Screw Cap 4-a. 13.7 - 19.6 N·m (1.4 - 2.0 kgf·m, 10.1 - 14.5 lb·ft) 5. Caliper Body 5-a. 21.6 - 31.4 N·m (2.2 - 3.2 kgf·m, 15.9 - 23.1 lb· ...