manager@kiaev6.org (915) 212-77133

Kia EV6: Special Service Tool

Special Service Tool

Tool Name / Number Illustration Description
Reduction gear oil seal installer
09445 - GI100

Kia EV6. Special Service Tool

 Rear reduction gear case side oil seal installation[2WD]
Front reduction gear case and housing oil seal installation[4WD]
(Used with the handle)
Reduction gear oil seal installer
09445 - GI200

Kia EV6. Special Service Tool

 Rear reduction gear housing side oil seal installation[2WD]
(Used with the handle)
Handle
09231 - H1100

Kia EV6. Special Service Tool

 Used with the oil seal installer
Engine fixture (adapter)
09200 - 4X000

Kia EV6. Special Service Tool

 Used for anchoring the motor and reducer gear when removing and installing the motor and reducer gear

    Previous pageLubricant

    Lubricant Front motor and reduction gear [4WD] Lubricant Capacity Kia genuine ATF SP4M-1 3.2 - 3.3 ℓ (0.85 - 0.87 U.S gal., 3.38 - 3.49 U.S.qt., 2.81 - 2.9 ...

    PREV

    Next pageDescription and Operation

    Description • Vehicle Control Unit (VCU) is the top-level controller of the vehicle that combines all the information to meet the driver's needs. • VCU controls Drive motor control, ...

    NEXT
    Other information:

    Kia EV6 (CV) 2022– Workshop Manual: SBW(Shift By Wire) Actuator
    Component 1. Main Wiring Protector 1-a. 6.9 - 9.8 N·m (0.7 - 1.0 kgf·m, 5.1 - 7.2 lb·ft) 2. SBW(Shift By Wire) Actuator 2-a. 20.6 - 27.5 N·m (2.1 - 2.8 kgf·m, 15.2 - 20.3 lb·ft) Removal     • When working on high voltage system, the work should be perfor ...

    Kia EV6 (CV) 2022– Workshop Manual: Charge Door Assembly
    Removal 1.Remove the right outside rear combination lamp.(Refer to Body Electrical System - "Rear Combination Lamp") 2.Remove the flange cover (A). 3.Disconnect the charge door control unit connector (A). 4.Remove the stop / tail lamp (A) after removing the screws. 5.R ...

    Search

    Kia EV6 (CV) 2022–2025 Workshop Manual

    Categories