manager@kiaev6.org (915) 212-77133

Kia EV6: Wheel and Tire

Previous pageRear Cross Member

Removal 1.Remove the height sensor. [If equipped](Refer to Body Electric System - "Intelligent Front-lighting System (IFS)") 2.Remove the rear motor and reduction gear assembly.(Refer ...

PREV

Next pageTire

Tire Wear 1.Measure the tread depth of the tires. Tread depth [Limit] :1.6 mm (0.062 in.) (High Speed Vehicle : 2.4 mm (0.09 in.) 2.If the remaining tread depth (A) is less than the limit, replace ...

NEXT
Other information:

Kia EV6 (CV) 2022– Workshop Manual: Combo Charger Inlet Assembly
Component 1. Rear Combination Lamp 2. Charge Door Assembly 3. Service Cover 4. Combo Charger Inlet Assembly 4-a. 9.8 - 10.8 N·m (1.0 - 1.1 kgf·m, 7.2 - 8.0 lb·ft) 4-b. 7.8 - 9.8 N·m (0.8 - 1.0 kgf·m, 5.8 - 7.2 lb·ft) 4-c. 7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft) ...

Kia EV6 (CV) 2022– Workshop Manual: Rear Door Frame Garnish and Molding
Removal Rear Door Frame Molding 1.Remove the rear door frame molding (A).     Clip position : Rear Door Front Frame Garnish 1.Remove the rear door outside belt strip (A).     Clip position : 2.Remove the rear door front frame garnish (A) ...