manager@kiaev6.org (915) 212-77133

Kia EV6: Rear Bumper

Previous pageFront Bumper Beam Assembly

Removal     • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high ...

PREV

Next pageComponents and Components Location

Component 1. Rear Bumper Beam Assembly 2. Rear Bumper Harness 3. Ultrasonic Sensor (PDW-R) 4. Rear Corner Radar 5. Rear Bumper Side Cover 6. Rear Bumper Reflector 7. Back-up Lamp 8. Re ...

NEXT
Other information:

Kia EV6 (CV) 2022– Workshop Manual: Description and Operation
Description High Voltage Control System Description • The high voltage battery control system consists of the Battery Management Unit (BMU), the Cell Monitoring Unit (CMU) and the Power Relay Assembly (PRA).-BMU : It controls the high voltage relay in the battery system and communicates wit ...

Kia EV6 (CV) 2022– Workshop Manual: Tie Rod End
Special Service Tool Tool Name / Number Illustration Ball joint puller 09568 - 2J100 Used for removal of tie rod end Removal Tie rod end 1.Remove the front wheel and tires.(Refer to Suspension System - "Wheel") ...