Description

The photo sensor (daylight sensor) is located above the center speaker grille. It has a built-in photovoltaic diode (sensing solar radiation). Luminescence appears in the part where light is received, and electric force is generated in proportion to the amount of light emission, and this electric force is transmitted to the automatic temperature control module to compensate for air volume and discharge temperature.

Removal

   

• When working on high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or electric leakage.

• When working a high voltage system, the technician must be observed and aware of "High Voltage System General Safety Information and Caution". If not, it may cause serious accidents such as electric shock or short circuit.

• When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedures.

1.Remove the photo sensor.(Refer to Body Electrical System - "Auto Light Sensor")

Installation

   

• When working on high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or electric leakage.

• When working a high voltage system, the technician must be observed and aware of "High Voltage System General Safety Information and Caution". If not, it may cause serious accidents such as electric shock or short circuit.

• When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedures.

1.Install in reverse order of removal.