manager@kiaev6.org (915) 212-77133

Kia EV6: Tightening Torque

Tightening Torque

Front Axle Assembly

Item N·m kgf·m lb·ft
Front driveshaft lock nut 294.2 - 313.8 30.0 - 32.0 217.0 - 231.5
Front hub bearing bolt 127.5 - 147.1 13.0 - 15.0 94.0 - 108.5
Dust cover bolt 6.9 - 10.8 0.7 - 1.1 5.1 - 8.0
Front wheel speed sensor bolt[4WD] 8.8 - 13.7 0.9 - 1.4 6.5 - 10.1
Tie rod end ball joint nut 98.1 - 117.7 10.0 - 12.0 72.3 - 86.8
Front lower arm and knuckle bolt and nut 98.1 - 117.7 10.0 - 12.0 72.3 - 86.8
Front knuckle and strut assembly bolt and nut 156.9 - 176.5 16.0 - 18.0 115.7 - 130.2
Strut assembly and front stabilizer bar link nut 98.1 - 117.7 10.0 - 12.0 72.3 - 86.8

Rear Driveshaft and Axle Assembly

Item N·m kgf·m lb·ft
Integrated drive axle bolt 127.5 - 147.1 13.0 - 15.0 94.0 - 108.5
Inner shaft bearing bracket bolt 63.7 - 70.6 6.5 - 7.2 47.0 - 52.1
Rear assist arm and carrier bolt and nut 117.7 - 137.3 12.0 - 14.0 86.8 - 101.3
Trailing arm and carrier bolt and nut 117.7 - 137.3 12.0 - 14.0 86.8 - 101.3
Rear upper arm - front and carrier bolt and nut 156.9 - 176.5 16.0 - 18.0 115.7 - 130.2
Rear upper arm - rear and carrier bolt and nut 156.9 - 176.5 16.0 - 18.0 115.7 - 130.2
Rear lower arm and carrier bolt and nut 176.5 - 196.1 18.0 - 20.0 130.2 - 144.7
Rear stabilizer bar link and carrier nut 98.1 - 117.7 10.0 - 12.0 72.3 - 86.8
Rear wheel speed sensor bolt 8.8 - 13.7 0.9 - 1.4 6.5 - 10.1

    Next pageLubricant

    Grease Driveshaft joint Item Joint Grease Quantity (g) LH RH Front driveshaft (4WD) CVBJ - 2 (Wheel side) RBA ...

    NEXT
    Other information:

    Kia EV6 (CV) 2022– Workshop Manual: Evaporator Temperature Sensor
    Description It is mounted on the evaporator to prevent freezing by sensing the temperature of the evaporator core. A NTC thermistor is installed inside the sensor, so when the temperature decreases, the resistance value increases, and when the temperature increases, the resistance value decr ...

    Kia EV6 (CV) 2022– Workshop Manual: Overhead Console Lamp
    Removal     • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit. • When wor ...