manager@kiaev6.org (915) 212-77133

Kia EV6: Power Tailgate System

Previous pageTailgate Weatherstrip

Removal     Be careful not to get sealant on the surface of the body. 1.Remove the tailgate weatherstrip (A).     When installing, check the center marking li ...

PREV

Next pageComponents and Components Location

Components 1. Power Tailgate Inner Switch 2. Tailgate Lid Upper Trim 3. Tailgate Lid Side Trim 4. Tailgate Lid Lower Trim 5. Tailgate Lid Drive Unit 6. Tailgate Lid Drive Unit Strip 7. ...

NEXT
Other information:

Kia EV6 (CV) 2022– Workshop Manual: Rear High Voltage Junction Box
Component 2WD 1. Front High Voltage Junction Box 1-a. 6.9 - 9.8 N·m (0.7 - 1.0 kgf·m, 5.1 - 7.2 lb·ft) 2. High Voltage Junction Box Service Cover 2-a. 3.9 - 5.9 N·m (0.4 - 0.6 kgf·m, 2.9 - 4.3 lb·ft, 34.7 - 52.1 lb·in) 2-b. 6.9 - 9.8 N·m (0.7 - 1.0 kgf·m, 5.1 - 7.2 lb·ft) 3. ...

Kia EV6 (CV) 2022– Workshop Manual: Charge Door Assembly
Removal 1.Remove the right outside rear combination lamp.(Refer to Body Electrical System - "Rear Combination Lamp") 2.Remove the flange cover (A). 3.Disconnect the charge door control unit connector (A). 4.Remove the stop / tail lamp (A) after removing the screws. 5.R ...