Installation

• When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.

• When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.

• When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.

1.Install in the reverse order of removal.

2.After replacing the Integrated Body Control Unit (IBU), perform the following procedure using a KDS diagnostic device.

(1)SMK : Smart Key registration(Refer to Smart Key System - "Smart Key")

(2)TPMS : Sensor ID registration(Refer to Suspension System - "Tire Pressure Monitoring System")