manager@kiaev6.org (915) 212-77133

Kia EV6: Drive Shafts and Boots

Inspection

1.Check the drive shaft boots for loose clamps, cracks, grease leaks, kinks or damage.

[Front - 4WD only]

Kia EV6. Drive Shafts and Boots

[Rear]

Kia EV6. Drive Shafts and Boots

    Previous pageDisc Brakes and Pads

    On Vehicle inspection Disc cleaning before inspection The rust generated on brake discs of long-term non-operating vehicles is naturally removed under normal driving conditions. However, it can a ...

    PREV

    Next pageSteering Gear Rack, Linkage and Boots

    Inspection Steering Wheel Play Inspection 1.Align the steering wheel straight. 2.Mark the steering wheel center (A) using masking tape or equivalent. 3.Turn the steering wheel until the wheel ...

    NEXT
    Other information:

    Kia EV6 (CV) 2022– Workshop Manual: Repair procedures
    Adjustment 1.Loosening the mounting bolts of the hood hinge (A) 2.Adjust the hood by moving it up and down or from side to side and tighten the bolt. 3.Adjust the height of the hood by turning the overslam bumper (B) clockwise and counterclockwise. 4.Loosen the bolts of the hood latch (C), ...

    Kia EV6 (CV) 2022– Workshop Manual: Knee Airbag (KAB) Module
    Description The Knee Airbag (KAB) module installed at the bottom of the crash pad lower panel on the driver's side protects the driver in case of a front collision. The SRS control module determines when the Knee airbag (KAB) is deployed.     Direct resistance measurement ...