manager@kiaev6.org (915) 212-77133

Kia EV6: Hood Lifter

Removal

Kia EV6. Hood Lifter   

Removing or installing the hood lifter requires an assistant.

1.Remove the hood lifter (B) after removing the clips (A).

Kia EV6. Hood Lifter

Installation

1.Install in the reverse order of removal.

Kia EV6. Hood Lifter   

• Make sure that the hood locks / unlocks and opens / closes properly.

• Adjust the hood alignment if necessary.

    Previous pageHood Insulator Pad

    Removal 1.Remove the hood insulator pad (A) after removing the fasteners. Installation 1.Install in the reverse order of removal. ...

    PREV

    Next pageHood Latch Release Handle

    Removal 1.Remove the hood latch release handle (A) after retracting the fixing hook inside. Installation 1.Install in the reverse order of removal.     • Make sure ...

    NEXT
    Other information:

    Kia EV6 (CV) 2022– Workshop Manual: Troubleshooting
    Troubleshooting Category Symptom Check List Relevant Parts/Components Lighting – HUD not working – Lighting brightness not automatically controlled (no ...

    Kia EV6 (CV) 2022– Workshop Manual: Tire
    Tire Wear 1.Measure the tread depth of the tires. Tread depth [Limit] :1.6 mm (0.062 in.) (High Speed Vehicle : 2.4 mm (0.09 in.) 2.If the remaining tread depth (A) is less than the limit, replace the tire.     If the tread depth is less than 1.6 mm (High Speed Vehicle: 2.4 ...

    Search

    Kia EV6 (CV) 2022–2025 Workshop Manual

    Categories