manager@kiaev6.org (915) 212-77133

Kia EV6: A Pillar Garnish

Removal

1.Remove the A-pillar garnish (A) from the top part (B).

Kia EV6. A Pillar Garnish

Kia EV6. A Pillar Garnish

Kia EV6. A Pillar Garnish   

Clip position :

Kia EV6. A Pillar Garnish

Installation

1.Install in the reverse order of removal.

    Previous pageFront Trunk

    Removal     • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high ...

    PREV

    Next pageC Pillar Garnish

    Removal 1.Remove the C-pillar garnish (A).     Clip position : Installation 1.Install in the reverse order of removal. ...

    NEXT
    Other information:

    Kia EV6 (CV) 2022– Workshop Manual: Rear wheel speed sensor
    Components and Components Location 1. Rear Wheel Speed Sensor Connector 1-a. 8.8 - 13.7 N·m (0.9 - 1.4 kgf·m, 6.5 - 10.1 lb·ft) 2. Rear Wheel Speed Sensor Harness 2-a. 19.6 - 29.4 N·m (2.0 - 3.0 kgf·m, 14.5 - 21.7 lb·ft) 3. Rear Wheel Speed Sensor Connector 4. EPB Actuator Connec ...

    Kia EV6 (CV) 2022– Workshop Manual: Rear Seat Cushion Cover
    Removal     • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit. • When wor ...