manager@kiaev6.org (915) 212-77133

Kia EV6: Inlet Actuator

    Previous pageCombo Charger Inlet Assembly

    Component 1. Rear Combination Lamp 2. Charge Door Assembly 3. Service Cover 4. Combo Charger Inlet Assembly 4-a. 9.8 - 10.8 N·m (1.0 - 1.1 kgf·m, 7.2 - 8.0 lb·ft) 4-b. 7.8 - 9.8 N·m ...

    PREV

    Next pageCharge Door Assembly

    Removal 1.Remove the right outside rear combination lamp.(Refer to Body Electrical System - "Rear Combination Lamp") 2.Remove the flange cover (A). 3.Disconnect the charge door co ...

    NEXT
    Other information:

    Kia EV6 (CV) 2022– Workshop Manual: On Vehicle Inspection
    On Vehicle Inspection     • Before replacing the Vehicle Charging Management System (VCMS), check the EVSE, combo charger inlet assembly, quick charge relay and related controller. • After replacing the VCMS and the related parts, vehicle should be checked that it charges ...

    Kia EV6 (CV) 2022– Workshop Manual: Power Tailgate Unit
    Removal     • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit. • When wor ...